Connect with us
Subscribe to updates
New enhanced formula for consistently great results!
AE71CM12 (1.2mm - 15kg Spool)
Rutile type flux-cored wire designed for all positional welding
Formulated for 100% CO2 and 75-80% Ar + 25-20% CO2
shielding gases
Excellent operator appeal and usability with stable arc, low
spatter, smooth bead appearance and easy slag removal
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Pallet Size | Part Number |
---|---|---|---|
1.2 | 15kg Spool | 1080 | AE71CM12 |
An all-position gas shielded flux cored wire
MIGFCH71T12 (1.2mm – 15kg Spool), MIGFCH71T16 (1.6mm – 15kg Spool)
Hobart 71T is an all-position flux cored wire designed to be used with 100% CO2. This all-position wire is extremely versatile for a variety of applications.
Hobart 71T can be used on all-position welds with both single and multiple pass welds on mild and some low alloy steels.
Typical applications include storage vessels, structural fabrication, machinery and piping, etc.
Shielding gas – 100% CO².
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.2 | 15kg Spool | MIGFCH71T12 |
1.6 | 15kg Spool | MIGFCH71T16 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresGeneral purpose rutile type electrode with easy starting and restarting properties
PH48A25 (2.5mm), PH48A32 (3.2mm), PH48A40 (4.0mm)
The Weldwell PH48A is a rutile electrode for all positional general purpose welding of mild steel. The arc stability on low open circuit voltages makes it excellent for use on 230V single phase welding machines.
All positional electrode
Suitable for out-of-position welding with slag that has competitive quick freezing properties
Remarkable tolerance to bad lift-up
Applications
Welding Positions
Electrode Size (mm) | Packaging | Approx No. of Rods per pkt | Part Number | |
---|---|---|---|---|
KG per Packet | Packets per Carton | |||
2.5 | 2.5 | 5 | 172 | PH48A25 |
3.2 | 5.0 | 3 | 163 | PH48A32 |
4.0 | 5.0 | 3 | 109 | PH48A40 |
Arc Welding Electrodes
View the Electrode RangeGeneral purpose rutile type electrode with excellent x-ray properties
PH2825 (2.5mm), PH2832 (3.2mm), PH2840 (4.0mm), PH2850 (5.0mm)
The Weldwell PH28 electrode has a medium-heavy rutile coating and yields a fairly rapidly solidifying slag. The weld appearance is very good for all positions. It is very easy to apply in the vertical up and overhead positions where a short arc length is beneficial.
Excellent x-ray properties
Great weld appearance for all positions
Easy to use
Applications
Welding Positions
Electrode Size (mm) | Packaging | Approx No. of Rods per pkt | Part Number | |
---|---|---|---|---|
KG per Packet | Packets per Carton | |||
2.5 | 2.5 | 5 | 159 | PH2825 |
3.2 | 5.0 | 3 | 164 | PH2832 |
4.0 | 5.0 | 3 | 104 | PH2840 |
5.0 | 5.0 | 3 | 53 | PH2850 |
Arc Welding Electrodes
View the Electrode RangeAll positional, rutile type stainless steel electrode
SC316L26TT (2.6mm), SC316L32TT (3.2mm)
Staincord 316L-16 is a “state-of-the-art” formulation for highest quality all position stainless steel welding. The extra low carbon alloy is specifically indicated for general purpose alloy for most common 300 series, stainless alloys and 409, 444 and 3CR12 ferric type alloys.
Extra smooth running and high arc stability
Offers easy re-strike
Provides excellent slag removal and bead appearance
Applications
Welding Positions
Electrode Size (mm) | Packaging (kg) | Part Number |
---|---|---|
2.6 | 2.5kg | SC316L26TT |
3.2 | 2.5kg | SC316L32TT |
All positional, rutile type stainless steel electrode
SC309MO26TT (2.6mm), SC309MO32TT (3.2mm)
Staincord 309Mo-16 is a “state-of-the-art” formulation for highest quality all position stainless steel welding. The extra low carbon alloy is specifically indicated for AISI 309Mo type alloys, but is also ideal for joining mild/low alloy steel to a range of 300 and 400 series stainless steels.
Features moisture resistant coating with extra smooth running
Provides high arc stability and easy re-strike
Offers excellent slag removal and bead appearance
Applications
Welding Positions
Electrode Size (mm) | Packaging (kg) | Part Number |
---|---|---|
2.6 | 2.5kg | SC309MO26TT |
3.2 | 2.5kg | SC309MO32TT |
All positional, rutile type stainless steel electrode
SC309L26TT (2.6mm), SC309L32TT (3.2mm)
Staincord 309L is a rutile coated - all position electrode for welding stainless steel containing 22 - 25% Cr and 12 - 14% Ni
Suitable for the dissimilar welding of stainless steel to mild/low alloy steels
Also used for welding the buffer layer of the 18/8 clad steels
Applications
Welding Positions
Electrode Size (mm) | Packaging (kg) | Part Number |
---|---|---|
2.6 | 2.5kg | SC309L26TT |
3.2 | 2.5kg | SC309L32TT |
A non-heat treatable, magnesium-alloyed aluminium wire
TIGMAX535624 (2.4mm – 4.5kg Packet), TIGMAX535632 (3.2mm - 4.5kg Packet)
Maxal 5356 is designed to weld 5xxx series structural alloys and 6xxx series extrusions. It is mainly used where higher weld strength and greater ductility is required.
High strength.
High ductility/fatigue strength/very high toughness.
Moderate ductility/formability.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
2.4 | 1kg Packet | TIGMAX535624 |
3.2 | 1kg Packet | TIGMAX535632 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresLow carbon 24Cr/13Ni type filler rod
TIGSS309LSI16V (1.6mm - 1kg Packet), TIGSS309LSI25V (2.4mm - 1kg Packet)
Low carbon 24Cr/13Ni type filler rod recommended for TIG and oxy-acetylene welding of 309 and 309L stainless steels. Also suitable for joining dissimilar steels such as stainless steel to mild or low alloy steels and for stainless surfacing of mild steel, carbon and low alloy steels. This TIG wire has low carbon and higher silicon content which improves the fluidity of the filler metal during welding.
A stainless steel TIG wire.
For joining dissimilar steels.
Shielding gas – Argon.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.6 | 1kg Packet | TIGSS309LSI16V |
2.4 | 1kg Packet | TIGSS309LSI16V |
Ultra low carbon and higher silicon content TIG wire
TIGSS316LSI09V (0.9mm - 1kg Packet), TIGSS316LSI12V (1.2mm - 1kg Packet), TIGSS316LSI16V (1.6mm - 1kg Packet), TIGSS316LSI20V (2.0mm - 1kg Packet), TIGSS316LSI24V (2.4mm - 1kg Packet), TIGSS316LSI32V (3.2mm - 1kg Packet)
Low carbon 19Cr/12Ni/2.5Mo type filler rod recommended for TIG or oxy-acetylene welding of 316 and 316L stainless steels. Recommended for general purpose welding of common 300 series stainless steels such as 302, 304 and 304L and ferritic stainless alloys including 410 and 430.
A stainless steel TIG wire.
For joining 316, 316L grades.
Shielding gas – Argon.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
0.9 | 1kg Packet | TIGSS316LSI09V |
1.2 | 1kg Packet | TIGSS316LSI12V |
1.6 | 1kg Packet | TIGSS316LSI16V |
2.0 | 1kg Packet | TIGSS316LSI20V |
2.4 | 1kg Packet | TIGSS316LSI24V |
3.2 | 1kg Packet | TIGSS316LSI32V |
Suitable for carbon steels, pipe root runs and high quality application
TIGPZ650016 (1.6mm - 5kg Packet), TIGPZ650024 (2.4mm - 5kg Packet), TIGPZ650032 (3.2mm - 5kg Packet)
PZ6500 TIG wire is a double deoxidised copper coated wire eminently suited for welding in all positions. Under satisfactory conditions will provide less than 4 ml of hydrogen per 100g of weld metal.
For welding mild to medium tensile steels.
X-ray qualities.
Shielding gas – Argon.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.6 | 5kg Packet | TIGPZ650016 |
2.4 | 5kg Packet | TIGPZ650024 |
3.2 | 5kg Packet | TIGPZ650032 |
Fast freezing, rutile type flux cored wire
MIGFCTM91012 (1.2mm - 15kg Spool)
Specially designed for use with high Argon shielding mixes such as 95%Ar/5% CO2.
All positional.
Excellent low-temperature impact toughness.
Suitable for use in a wide variety of critical applications.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.2 | 15kg Spool | MIGFCTM91012 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresFormulated to have low smoke and fume levels
MIGFCTM11012 (1.2mm - 15kg Spool)
FabCor 1100 is a metalcored, gas shielded wire that is designed for the single and multi-pass welding of quenched and tempered steels including T1-type, HY80 and HY100.
Assists in producing smooth weld beads and uniform fusion.
Promotes versatility.
Reduces equipment costs.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.2 | 15kg Spool | MIGFCTM11012 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresFabCor 86R has superior operator appeal due to almost non existent spatter
MIGFCFC86R12 (1.2mm - 15kg Spool)
A metal cored wire with higher deoxidization elements allow this wire to have greater tolerance for mill scale welding applications. Single and multiple pass applications.
No Slag Coverage.
Outstanding High-Production Performance.
Smooth Arc Characteristics.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.2 | 15kg Spool | MIGFCFC86R12 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresFor on-site welding applications
MIGFCFS21B09S (0.9mm – 4.5kg Spool), MIGFCFS21B12S (1.2mm – 4.5kg Spool), MIGFCFS21B12 (1.2mm - 15kg Spool)
A general purpose self-shielded tubular wire that is designed for single and multi-pass welding of thin gauge to 20mm thick mild or galvanized steels. Great for welding fillet or lap welds, you will find that this all-position wire has high operator appeal, producing a smooth spray-like transfer with low spatter levels, excellent weld appearance and easy to remove slag.
Self-Shielded or “Gasless” Flux Cored Joining Wires.
Suitable for Single Pass/Multi-pass Applications.
Suitable for Mild/Galvanised Steels.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
0.9 | 4.5kg Spool | MIGFCFS21B09S |
1.2 | 4.5kg Spool | MIGFCFS21B12S |
1.2 | 15kg Spool | MIGFCFS21B12 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresDesigned for challenging structural steel erection
MIGFCFSXLR816 (1.6mm – 15kg Spool), MIGFCFSXLR818 (1.8mm - 15kg Spool)
Low hydrogen T-8 self-shielded, all positional flux cored wire, producing a stable arc and flat bead profile, especially suited for vertical-up welds at high currents with excellent mechanical properties and a tensile strength of 490 MPa.
Welds Out of Position at High Currents.
Excellent Slag Removal.
No Shielding Gas Required.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.6 | 15kg Spool | MIGFCFSXLR816 |
1.8 | 15kg Spool | MIGFCFSXLR816 |
Flux-Cored Wires
View the Hobart Flux-Cored WiresPrecision layer wound Al/5%Mg wire
MIG535610 (1.0mm - 6kg Spool), MIG535612 (1.2mm - 6kg Spool)
A precision layer wound Aluminium - 5% Magnesium wire suitable for a wide range of gas metal arc welding applications on wrought or cast aluminium alloys containing magnesium as a major alloying element. Some grades of wrought aluminium - magnesium alloys which can be welded with Austmig 5356 are, 5083, 5086, 5454 and 5456.
Aluminium - 5% Magnesium Alloy, Metal Inert Gas (MIG) welding wire.
Double shaved and precision layer wound for superb feedability.
For welding cast and wrought aluminium alloys containing Magnesium.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.0 | 6kg Spool | MIG535610 |
1.2 | 6kg Spool | MIG535612 |
Smooth arc and soft, good weld performance
AUST11085KG (0.8mm - 5kg Spool) , AUST11095KG (0.9mm - 5kg Spool), AUST11125KG (1.2mm - 5kg Spool)
A Shelf-Shielded Flux Cored Wire for single and multi pass applications in all positions. Arc is smooth and soft, good welding performance, full slag covering and easy slag removal.
Self-Shielded Flux Cored Wire - Shielding Gas not Required
All Positional Welding of Single Pass / Multi Pass Applications.
Full Slag Covering and Easy Slag Removal.
Applications
Welding Positions
A rutile flux shielded flux cored wire
AUSTFIL71T12 (1.2mm – 15kg)
A rutile flux cored wire designed for excellent performance in all positional fillet and butt welding applications. Austfil 71T is formulated exclusively for use with cost effective CO².
Excellent performance in all positional fillet and butt welding applications.
Shielding gas – 100% CO².
Polarity - DC +.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.2 | 15kg Spool | AUSTFIL71T12 |
High tensile MIG wire
MIGPZ604810 (1.0mm - 15kg Spool), MIGPZ604812 (1.2mm - 15kg Spool)
Suitable for welding high tensile steels such as T1, Bisalloy 80, AISI 4140. It is important that the correct welding procedures for the particular steel and thickness are followed. With attention being paid to preheat and inter-pass temperatures, and arc energy values.
A high tensile type of wire.
Shielding Gas - Argon/CO²/O².
Polarity - DC +.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
1.0 | 15kg Spool | MIGPZ604810 |
1.2 | 15kg Spool | MIGPZ604812 |
Chromium-manganese alloy electrode
PH40032 (3.2mm), PH40040 (4.0mm)
The iron powder in the PH400 electrode coating gives fast rates of deposition and allows the use of higher welding currents than normal. These electrodes are very smooth running and easy to use with either a short arc or the touchweld technique, so that a minimum time is used to cover large.
A tough chromium-manganese alloy steel.
Easy release slag with virtually no spatter.
Deposits little or no spatter.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
3.2 | 5.0 | 5 | 127 | PH40032 |
4.0 | 5.0 | 5 | 68 | PH40040 |
Arc Welding Electrodes
View the Electrode RangeSmooth running AC/DC electrode depositing an air hardening Martensitic Cr/Mo/V steel alloy
PH60032 (3.2mm), PH60040 (4.0mm)
The Weldwell PH600 is a heavy coated iron powder electrode which deposits a weld metal containing carbon chromium and manganese. This resultant deposit is martensitic, containing finely divided chromium carbides which are highly resistant to abrasive wear, and also have very good properties against sliding and rolling friction.
Versatile, low cost hard facing deposit.
Self hardening.
Typical undiluted hardness 59Rc.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
3.2 | 5.0 | 3 | 133 | PH60032 |
4.0 | 5.0 | 3 | 67 | PH60040 |
Arc Welding Electrodes
View the Electrode RangeHeavy coated hardfacing electrode ideal for hard surfacing applications
PH70032 (3.2mm), PH70040 (4.0mm)
The Weldwell PH700 is a high carbon-chrome type of electrode for impact and severe abrasion and has good resistance to scaling and corrosion in high temperatures. It can be deposited directly on to mild steel, low alloy steel or austenitic manganese steel. However, when the base metal is harden-able or high alloy, a buffer layer of PH56S, PH77 or the stainless alloy RSP may be necessary. Typical undiluted hardness 62Rc.
Deposits a high chromium, high carbon type alloy.
Can be deposited directly on to mild steel, low alloy steel or austenitic manganese steel.
Deposits exhibit exceptional resistance to extreme abrasion and moderate to heavy impacts.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
3.2 | 5.0 | 3 | 86 | PH70032 |
4.0 | 5.0 | 3 | 57 | PH70040 |
Arc Welding Electrodes
View the Electrode RangeEasy to use, smooth running high iron powder, rutile type electrode
PH702432 (3.2mm), PH702440 (4.0mm), PH702450 (5.0mm)
The Weldwell PH7024 is a heavy coated rutile contact type electrode developed for high speed welding of mild steel in the down-hand and horizontal positions using AC or DC current. The high iron powder content in the flux coating gives high efficiency combined with excellent mechanical properties and weldability.
Extremely easy slag removal.
High deposition rates.
Instant striking and re-striking.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
3.2 | 5.0 | 3 | 96 | PH702432 |
4.0 | 5.0 | 3 | 54 | PH702440 |
5.0 | 5.0 | 3 | 32 | PH702450 |
Arc Welding Electrodes
View the Electrode RangeA low hydrogen controlled electrode
PH56S25 (2.5mm), PH56S32 (3.2mm), PH56S40 (4.0mm)
The Weldwell PH56S is an all-positional low hydrogen electrode which deposits a very pure weld metal with exceptional mechanical and X-ray properties. For use on mild, unalloyed micro alloyed and low alloy steels, also for steels to LT 40 spec. Used with a short arc and reasonably slow travel speeds.
Suitable for all positions.
Deposits a very pure weld.
X-ray qualities.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
2.5 | 2.5 | 5 | 172 | PH56S25 |
3.2 | 5.0 | 3 | 163 | PH56S32 |
4.0 | 5.0 | 3 | 109 | PH56S40 |
Arc Welding Electrodes
View the Electrode RangeA low hydrogen controlled electrode
PH16TC25 (2.5mm), PH16TC32 (3.2mm), PH16TC40 (4.0mm)
Smooth running, basic low hydrogen electrode, developed for all positional (except vertical down) welding, using AC or DC power sources. It has exceptional arc stability and weldability and delivers high quality weld deposits with reliable notch toughness to -40°C.
Very fluid slag action.
Easy slag removal.
Exceptional arc stability.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
2.5 | 2.5 | 5 | 172 | PH16TC25 |
3.2 | 5.0 | 3 | 163 | PH16TC32 |
4.0 | 5.0 | 3 | 109 | PH16TC40 |
Arc Welding Electrodes
View the Electrode RangeExceptionally smooth iron powder flux coated electrode
PH7725 (2.5mm), PH7732 (3.2mm), PH7740 (4.0mm)
Smooth running basic type iron powder hydrogen controlled electrode used for all positional welding except vertical down. This electrode is used where the highest standards are required. Weld features include high ductility, x-ray quality and sub zero temperature impact to -50°C.
Suitable for welding steel, low alloy, medium tensile steels.
Smooth running all positional (except vertical down) hydrogen controlled.
Used for maintenance and general repair work.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
2.5 | 2.2 | 5 | 107 | PH7725 |
3.2 | 5.0 | 3 | 126 | PH7732 |
4.0 | 5.0 | 3 | 87 | PH7740 |
Arc Welding Electrodes
View the Electrode RangeCellulose electrode for all positional/high penetration welding
PH31A32 (3.2mm), PH31A40 (4.0mm)
The Weldwell PH31A is formulated for a deeply penetrating arc with fast burn-off rate. It is used primarily for welding pipe, using the stove-pipe technique. PH31A has good mechanical and X-ray characteristics. A touch technique or a short arc are the main requisites, depending upon the welding conditions.
A thinly coated cellulose electrode.
Intended for welding in all positions.
An easy to ignite arc that is powerful and extremely stable.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per kg | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
3.2 | 5.0 | 3 | 166 | PH31A32 |
4.0 | 5.0 | 3 | 107 | PH31A40 |
Arc Welding Electrodes
View the Electrode RangeGeneral purpose rutile type electrode
PH6825 (2.5mm), PH6832 (3.2mm), PH6840 (4.0mm)
Easy starting, smooth running, popular all positional mild steel general purpose electrode. Weldwell PH68 has the extra arc force and fast freezing slag required for vertical down welds. With great operator appeal, it’s the ideal general purpose choice for the ‘one electrode’ workshop.
General purpose rutile type electrode.
Superb arc starting and restriking characteristics, tolerant to dirty materials eg. rust etc.
One current setting can be used for welding in all positions.
Applications
Welding Positions
Electrode Size (mm) | Packet Size (kg) | Approx No. of Rods per Pkt | Part Number | |
---|---|---|---|---|
Packet | Carton | |||
2.5 | 2.5 | 5 | 172 | PH6825 |
3.2 | 5.0 | 3 | 163 | PH6832 |
4.0 | 5.0 | 3 | 109 | PH6840 |
Arc Welding Electrodes
View the Electrode RangeCopper coated, mild carbon steel MIG wire
AUSTMIGES665 (0.6mm - 5kg spool), AUSTMIGES685 (0.8mm - 5kg spool), AUSTMIGES68 (0.8mm - 15kg spool), AUSTMIGES695 (0.9mm - 5kg spool), AUSTMIGES69 (0.9mm - 15kg spool), AUSTMIGES61 (1.0mm - 15kg spool), AUSTMIGES612 (1.2mm - 15kg spool)
A copper coated, low carbon steel GMAW wire, formulated for optimum performance under Argon/CO² mixed gases and welding grade CO². Arc transfer characteristics are excellent with Argon based gas mixtures, particularly in spray and pulsed transfer modes.
Precession layer wound.
Designed for use with Argon/CO2 and Co2 shielding gases.
Electrostatically copper coated gas metal arc wire.
Applications
Welding Positions
Wire Size (mm) | Pack Size and Type | Part Number |
---|---|---|
0.6 | 5kg Spool | AUSTMIGES665 |
0.8 | 5kg Spool | AUSTMIGES685 |
0.8 | 15kg Spool | AUSTMIGES68 |
0.9 | 5kg Spool | AUSTMIGES695 |
0.9 | 15kg Spool | AUSTMIGES69 |
1.0 | 15kg Spool | AUSTMIGES61 |
1.2 | 15kg Spool | AUSTMIGES612 |