Weldwell PH400

Chromium-manganese alloy electrode

PH40032 (3.2mm), PH40040 (4.0mm)

The iron powder in the PH400 electrode coating gives fast rates of deposition and allows the use of higher welding currents than normal. These electrodes are very smooth running and easy to use with either a short arc or the touchweld technique, so that a minimum time is used to cover large.

A tough chromium-manganese alloy steel.

Easy release slag with virtually no spatter.

Deposits little or no spatter.

Where to Buy

Product Overview


  • Track Components
  • Shafts
  • Gears

Welding Positions

  • 1G
  • 2G
  • 2F


  • Stick
AS/NZS 2576 1435-A4
AWS A5.13 E Fe2

Typical All Weld Metal Chemical Analysis

  • C
  • Mn
  • Si
  • Cr

Typical All Weld Metal Mechanical Analysis

  • Metal Hardness
    35 - 39 RC

Ordering Information

Electrode Size (mm) Packet Size (kg) Approx No. of Rods per kg Part Number
Packet Carton
3.2 5.0 5 127 PH40032
4.0 5.0 5 68 PH40040

Related Products

Related News

© 2022 Weldwell New Zealand. All rights reserved. A dvision of ITW