WIA Weldarc 200DC NEW

Precision DC TIG Welding for the Workshop or On-SIte.


Get quality results with the Weldarc 200 DC Stick/TIG welder. For intermediate to welding professionals, HF Start and Pulse TIG capabilities provide easy non-contact arc starting and allows greater heat control of the weld pool, increases weld penetration and speed providing high quality weld results. Plus, it supports foot control adjustment for enhanced control capabilities.

Built with quality components and manufactured with 3 years warranty, the Weldarc 200 DC is an easy choice for welders looking for a well-priced professional grade Stick/TIG welder that doesn’t compromise on results.

Where to Buy

Product Overview


What's In The Box

  • Work Clamp (3m)
  • Industrial Twist Lock Electrode Holder (4m)
  • TIG Torch (8m)
  • TIG Started Kit
  • Argon Gas Regulator
  • Gas Hose

Optional Extras

  • Foot Control - AA76


With 3 years warranty on all products and a New Zealand-wide service network, the new WIA range offers better than ever reliability and the best back-up service around.

Single Phase

200 A single phase Stick & TIG welder


Weighing only 12kg. the Weldarc 200DC can go where you go.

HF Start

For easy non-contact arc starting; Increases tungsten life; Reduces weld inclusions.

Pulse TIG

For greater heat control; Increases weld penetration, speed and quality.

Power Factor Correction

Smooths out the actual input current; Maximises efficiency when welding on long leads or from generators.

Built-In Thermal Protection

Prevents the machine from operating beyond its safe thermal zone.

Fan-on-Demand™ Cooling Fan

Reduces noise, energy use and contaminates.

Arc Force

Provides a more stable arc and prevents electrode sticking.

Hot Start

For better, easier arc starting.


Voltage Reduction Device

IP23S Rated

Provides extra protection in harsh environments.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.


  • Stick
  • TIG
  • 1 Phase
  • Primary Voltage
    240 VAC-50/60Hz
  • Rated Primary Current
    14 Amps
  • Max Primary Current
    25 Amps
  • Recommended Generator Power
    10 kVa
  • Supply Plug
    15 Amp
  • IP Rating
  • Weight
  • Warranty
    3 Years
  • Standards Compliance
    AS60974.1 & AS1674.2 (VRD)
    Output Range:
    - 20A/20.8V-180A/27.2V

    Rated Output @ 40°C (10min):
    - 180A/27.2V @ 30%
    - 127A/25V 60%
    - 99A/24V @ 100%
    Output Range:
    - 10A/10.4V-200A/18V

    Rated Output @ 40°C (10min):
    - 200A/18V @ 30%
    - 141A/15.6V @ 60%
    - 110A/14.4V @ 100%

    Material Thickness Range:
    - Welds up to 8mm steel plate, single pass

Related News

© 2024 Weldwell New Zealand. All rights reserved. A dvision of ITW