Hobart Maxal Ali TIG 5356

A non-heat treatable, magnesium-alloyed aluminium wire

TIGMAX535624 (2.4mm – 4.5kg Packet), TIGMAX535632 (3.2mm - 4.5kg Packet)

Maxal 5356 is designed to weld 5xxx series structural alloys and 6xxx series extrusions. It is mainly used where higher weld strength and greater ductility is required.

High strength.


High ductility/fatigue strength/very high toughness.


Moderate ductility/formability.


 

Where to Buy

Product Overview

Applications

  • Shipbuilding
  • Rail Cars
  • Transportation
  • 5086 and Lower Strength Alloys (35 ksi minimum UTS)

Welding Positions

  • 1G
  • 2G
  • 3G Upwards
  • 4G
  • 2F

Specifications

  • TIG
Classification
AS/NZS ISO 18273-S Al 5356
AWS A5.10 ER5356

Typical All Weld Metal Chemical Analysis

  • Si
    0.25
  • Fe
    0.40
  • Cu
    0.10
  • Mn
    0.05 - 0.20
  • Mg
    4.5 - 5.5
  • Cr
    0.05 - 0.20
  • Zn
    0.10
  • Ti
    0.06 - 0.20
  • Be
    <0.003

Typical All Weld Metal Mechanical Analysis

  • Melting Range
    570 - 635°C
  • Electrical / Thermal Conductivity
    29%
  • As Welded UTS Typical
    262 MPa
  • Anodized Colour
    White
  • Elevated Temp. Applications
    + 65°C

Ordering Information

Wire Size (mm) Pack Size and Type Part Number
2.4 1kg Packet TIGMAX535624
3.2 1kg Packet TIGMAX535632

Related News

© 2024 Weldwell New Zealand. All rights reserved. A dvision of ITW