WIA Wirefeeder W67 NEW

4 Roll Drive Wire Feeder. For Consistent Wire Feed Control.


Suitable for the Weldmatic 350 and 500, the W67 wire feeder provides the ultimate wire feeding capabilities. The 4 roll drive motor produces a consistent and strong drive for a variety of wires, while the digital meters provide finer set up and control.

With added features including Arc start, purge, latch, burn back and more, the W67 gives users the versatility to custom their settings to suit their wire feeding needs and preferences. Built with heavy duty quality components, and manufactured with 3 years warranty, the W67 offers reliability and performance that’s second to none.

Where to Buy

Product Overview


What's In The Box

  • W67 4 Roll Drive Wirefeeder


With 3 years warranty on all products and a New Zealand-wide service network, the new WIA range offers better than ever reliability and the best back-up service around.

Spool Sizes

Suits 5 and 15kg spools.

Heavy Duty 4 Roll Drive

Large strong drive gears and ball bearings.


Purges gas line without feeding wire.


Feeds wire without wasting gas.


Stop / Start gun switch trigger. Reduces operator fatigue.

Pre Gas

Allows gas to flow before weld starts.

Post Gas

Continued gas flow after weld has finished.

Spot Time

For short weld times for repetitive spot welds.


Controls wire burn back upon weld completion.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.


  • MIG
  • Primary Voltage
    24 V DC (from welding power source)
  • Rated Primary Current
    5 Amps
  • Spool Sizes
    5kg & 15kg
  • Wire Speed Range
    17-189 RPM: 2-22 m/min
  • Wire Size Range
    0.9mm - 1.6 mm
  • Pre/Post Gas
    Yes, 0-10 seconds
  • Spot Time
    Yes, 0-10 seconds
  • Arc Start
  • Latch
    2T/4T Modes
  • Weight
  • Warranty
    3 Years

Related News

© 2024 Weldwell New Zealand. All rights reserved. A dvision of ITW