WIA Wirefeeder W64-1 NEW

4 Roll Drive Wire Feeder. For Consistent Wire Feed Control.

WFL018

Suitable for the Weldmatic 270, 356, 396 and Fabricator, the W64-1 wire feeder provides the ultimate wire feeding capabilities. The 4 roll drive motor produces a consistent and strong drive for a variety of wires, while the low and high speed ranges allows for finer wire speed control.

With added features including Arc start, creep, purge, latch, burn back and more, the W64-1 gives users the versatility to custom their settings to suit their wire feeding needs and preferences. Built with heavy duty quality components, and manufactured with 3 years warranty, the W64-1 offers reliability and performance that’s second to none.

Where to Buy

Product Overview Specifications Downloads Related News & Products

Product Overview

Applications

What's In The Box

W64-1 4 Roll Drive Wirefeeder

Warranty*

With 3 years warranty on all products and a New Zealand-wide service network, the new WIA range offers better than ever reliability and the best back-up service around.

Spool Sizes

Suits 5 and 15kg spools

Heavy Duty 4 Roll Drive

Large strong drive gears and ball bearings.

High & Low Speed Range

For finer wire speed control.

Creep Start

Slow wire speed until weld stars. Ideal for aluminium.

Purge

Purges gas line without feeding wire.

Inch

Feeds wire without wasting gas.

Latch

Stop / Start gun switch trigger. Reduces operator fatigue.

Pre Gas

Allows gas to flow before weld starts.

Post Gas

Continued gas flow after weld has finished.

Spot Time

For short weld times for repetitive spot welds.

Burnback

Controls wire burn back upon weld completion.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.

Specifications

Primary Voltage

32 VAC (from welding power source)
Rated Primary Current

5 Amps
Spool Sizes

5kg & 15kg
Wire Speed Range

0-172 RPM
0 - 10 metres per min
low speed range
8 - 20 metres per min
high speed range
Wire Size Range

0.6mm – 1.6mm
Pre/Post Gas

Pre-gas range 0-2 seconds
Post-gas range 0-10 seconds
Spot Time

0-2 seconds
Arc Start

Soft/Fast
Start Speed

Normal/Creep
Latch

2T/4T Modes
Weight

24.5kg
Warranty

3 Years