Miller XMT® 350 FieldPro with ArcReach

The optimised stick and TIG performance specifically meets the needs of open root pipe welding and helps reduce training time and increases quality. Starts maintain root opening and prepared edge and stops limit arc marks outside of the heat-affected zone.

Enables operators to use these advanced processes in the field for faster, more efficient welds.

*Available with ArcReach Smart Feeder only

Automatically compensates for various input Voltage. Suits jobsite and generator power. Keeps welding output constant even if input power varies by ±10%. Single or 3 phase.

The cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.

Allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten.

Increases the output Amperage at the start of a weld if necessary, eliminating electrode sticking.

Automatically establishes an exclusive communication between the power source and the wire feeder, using the existing weld cables upon system power up.

Reduces the number of control setup combinations without reducing any features.

Available in the stick and wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications.

Allows operators to make precise adjustments even while a weld bead is being laid, which allows parameters to be changed while the arc is on.

*Only available when connected to a XMT 350 FieldPro power source.

Makes proper setup of weld parameters faster; automatically adjusting voltage based on weld cable length. This ensures that the voltage a welder operator sets is the voltage they get.

*Only available when connected to a XMT 350 FieldPro power source.

Protects electrical components and PC boards from contamination.

Designed and built to withstand the harshest field environments.

Provides high-quality weld cable connections.

Offers heavy-duty protection with the benefit of reduced weight.

Made easy with a small, compact design and Auto-Line technology.

Provides conventional stick, TIG, FCAW, and MIG welding as well as the advanced technologies of RMD and pulse.

ArcReach-equipped power sources and wire feeders work with non-ArcReach equipment; however, the complete ArcReach benefit is only realised with the ArcReach system.