Weldwell PH56S
A Low Hydrogen Controlled Electrode
The Weldwell PH56S is an all-positional low hydrogen electrode which deposits a very pure weld metal with exceptional mechanical and X-ray properties. For use on mild, unalloyed micro alloyed and low alloy steels, also for steels to LT 40 spec. Used with a short arc and reasonably slow travel speeds.
AWS A5.1 E7016 H8
Applications
OIL & GAS
PIPE WELDING
STRUCTURAL STEEL CONSTRUCTION
OFF-SHORE WHERE NO-ALLOYING IS PERMITTED
MINING EQUIPMENT
HEAVY GRINDERS & EARTH MOVING PLANT REPAIR & MAINTENENCE
For Offshore Fabrication
The Weldwell PH56S offers consistent results with the assurance of high impact values in the as-welded condition and further improved by stress relieving.
Excellent X-Ray Properties
The Weldwell PH56S deposits a very pure weld metal offering exceptional mechanical and X-Ray properties.
Specifications
Typical All Weld Metal Chemical Analysis
C
0.05
Mn
1.11
Si
0.34
Typical All Weld Metal Mechanical Analysis
Yield Strength
497 MPa
Tensile Strength
589 MPa
Elongation
28%
CVN Impact Values
107J @ -40°C
Resources
Weldwell PH56S
A Low Hydrogen Controlled Electrode
The Weldwell PH56S is an all-positional low hydrogen electrode which deposits a very pure weld metal with exceptional mechanical and X-ray properties. For use on mild, unalloyed micro alloyed and low alloy steels, also for steels to LT 40 spec. Used with a short arc and reasonably slow travel speeds.
AWS A5.1 E7016 H8
Applications
OIL & GAS
OFF-SHORE WHERE NO-ALLOYING IS PERMITTED
STRUCTURAL STEEL CONSTRUCTION
PIPE WELDING
HEAVY GRINDERS & EARTH MOVING PLANT REPAIR & MAINTENENCE
MINING EQUIPMENT
Specifications
Typical All Weld Metal Chemical Analysis
C
0.05
Mn
1.11
Si
0.34
Typical All Weld Metal Mechanical Analysis
Yield Strength
497 MPa
Tensile Strength
589 MPa
Elongation
28%
CVN Impact Values
107J @ -40°C