S-74S Standard Wire Feeder
Suits Deltaweld, Dimension and XMT Power Sources
Standard, simple MIG wire feeder for most heavy-industrial applications providing increased accuracy and control of the most common weld parameters
Improves Arc Starts
Featuring factory-set run-in control the S-74S provides better arc starts.
Quick-Release, Drive-Roll Pressure Adjustment Arm
Allows drive roll change without losing spring preload setting.
Increases Service Lifes
The S-74S wire feeder provides solid-state speed control and break circuit, extending service intervals.
Trouble Free Feeding
Floating positive drive systems provide trouble-free feeding on a variety of wires.
Specifications
Welding Mode
CV/DC
Input Power
24 VAC, 10 A, 50/60 Hz
Wire Speed
1.3 - 19.8m/min
Electrode Wire Diameter Capacity
Solid Wire: 0.9 - 1.6mm
Flux Cored: 1.2 - 2.8mm
Dimensions (mm)
H: 356
W: 318
D: 711
Weight
26kg
Resources
S-74S Standard Wire Feeder
Suits Deltaweld, Dimension and XMT Power Sources
Standard, simple MIG wire feeder for most heavy-industrial applications providing increased accuracy and control of the most common weld parameters
Specifications
Welding Mode
CV/DC
Input Power
24 VAC, 10 A, 50/60 Hz
Wire Speed
1.3 - 19.8m/min
Electrode Wire Diameter Capacity
Solid Wire: 0.9 - 1.6mm
Flux Cored: 1.2 - 2.8mm
Dimensions (mm)
H: 356
W: 318
D: 711
Weight
26kg