WIA Weldmatic 500i

Complete MIG welding solution

WIA500IPKG

Industrial multi-process welding machine, built tough for medium to heavy fabrication, and all general industrial fabrication applications.

Package with W65 Wirefeeder and Trolley with Drawer.


The 500 Amp three phase multi-process inverter suits MIG, Stick, Arc Air Gouging and Lift-Arc TIG welding.


Suits 5 & 15kg spools.

Where to Buy

Product Overview

Applications

  • Heavy Fabrication
  • General Industrial Fabrication

What's In The Box

  • Interconnecting Lead (10m)
  • W65 4 Roll Drive Heavy Duty Wirefeeder
  • Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
  • Work Lead (10m) with Heavy Duty G Clamp
  • Industrial Twist Lock Electrode Holder (3m)
  • Drive Rollers – 0.9/1.2 & 1.2/1.6mm V Groove 0.9/1.2 & 1.2/1.6mm Knurled

Warranty*

Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by a New Zealand wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic MIG Machines warranty statement.

Industrial Multi-Process Welding Solution

This 500 Amp three phase multi-process inverter suits MIG, Stick, Arc Air Gouging and Lift-Arc TIG welding and is ideal for medium to heavy fabrication, and all general industrial fabrication applications.

VRD

Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to New Zealand Standards AS/NZS 60974.1 & AS/NZS 1674.2 CAT C.

Built-In Operator Safety

The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.

Gas or Gasless

Suits gas shielded and flux cored wires.

Spool Capacity

5kg & 15kg

Variable Arc Control

The package features allow full control of the arc. Infinite voltage control and arc control to adjust arc harshness, and arc start to control the wire starting speed.

Flexibility & Power

Optimal weld characteristics provide high quality results on steel, stainless steel and aluminium, plus the power to comfortably run all popular sizes of solid and flux cored wires. With the capacity to run 1.6mm flux cored wire, the 500i can handle a wide range of applications.

Digital Meters

Digital Volt and Amp meters retain last weld information and allow precise set-up.

Comes with a 32 Amp Supply Plug

Specifications

  • MIG
  • Stick
  • TIG
  • Gouging
  • 3 Phase
  • Primary Voltage
    380/415 Vac - 50/60 Hz
    3 Phase
  • Rated Primary Current
    28.7 Amps
  • Max. Primary Current
    37 Amps
  • Recommended Generator kVa
    25 kVA
  • Welding Current Range
    37 - 500 Amps
  • Wire Size Range (mm)
    Carbon Arc Air Max. 8mm
    0.9-1.6 solid
    0.9-1.6 cored
  • Shipping Weight
    138kg

Related Products

Related News

© 2019 Weldwell New Zealand. All rights reserved. A dvision of ITW