WIA Cutmatic® 45 NEW

Portable and Precise. Effortless Plasma Cutting.


From the workshop to on-site the Cutmatic 45 is highly portable and can go where you go. Capable of cutting mild steel, stainless steel and aluminium, its serious cutting capabilities can effortlessly clean cut up to 16mm and server cut up to 20mm.

With up-to-date date technology, the Cutmatic 45 offers more than its competition, including power factor correction for maximum efficiency. Built with quality components and manufactured to deliver, you’ll get more than you pay for with the Cutmatic 45.

Where to Buy

Product Overview


  • General Fabrication
  • On-Site Maintenance
  • Automotive Repair

What's In The Box

  • Parker Surecut Torch (6m)
  • Torch Cutting Guide (1)
  • Heavy Duty Work Clamp (4m)
  • Electrode (1)
  • 0.8mm Tips (1)
  • 1.0mm Tips (1)

Optional Extras

  • Stand-off Cutting Buggy – SCP2551
  • Circle Cutting Attachment Kit – SCP2550


With 3 years warranty on all products and a New Zealand-wide service network, the new WIA range offers better than ever reliability and the best back-up service around.

Single Phase

45 A single phase plasma cutter.


Weighing only 11kg, the Cutmatic 45 can where you go.

Power Factor Correction

Smooths out the actual input current. Maximises efficiency when welding on long leads or from generators.

Plasma Torch with Pilot Arc Start

Designed for a safe and sound strike without high frequency.

Water and Air Filter

Removes water in the air. Increases torch tip life.

IP Rating

IP21S Rated

Built-In Thermal Protection

Prevents the machine from operating beyond its safe thermal zone.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.


  • Plasma Cutting
  • 1 Phase
  • Primary Voltage
    240 VAC-50/60Hz
  • Rated Primary Current
    14.2 Amps
  • Max Primary Current
    22.5 Amps
  • Recommended Generator Power
    8 kVa
  • Supply Plug
    15 Amp
  • IP Rating
  • Weight
  • Warranty
    3 Years
  • Standards Compliance
    AS60974.1 & AS1674.2
  • Plasma Specification
    Current Range:
    - 15-45 Amps

    Rated Output @ 40°C (10min):
    - 45A/98V @40%
    - 28A/91.3V @100%

    Cutting Tip Size:
    - 0.8-1.0mm

    Mild Steel Cutting Range:
    - Clean cut 16mm
    - Sever cut 20mm

    Stainless Steel Cutting Range:
    - Clean cut 12mm
    - Sever cut 16mm

    Aluminium Cutting Range:
    - Clean cut 10mm
    - Sever cut 12mm

    Air Consumption:
    - 115l/min

    Air Pressure:
    - 90PSI/0.6MPA

Related News

© 2023 Weldwell New Zealand. All rights reserved. A dvision of ITW