Miller MPi 220P

Multi-Process welding at your fingertips

MILMPI220P

All you need for MIG welding in one small, lightweight package.

Changes process with the flick of a switch.


Excellent arc characteristics - Positive arc starts and an extremely stable arc with minimal spatter.


Suitable for MIG/MAG, Pulsed MIG, Stick, TIG, Flux-Cored. Excellent quality pulse MIG for aluminium, stainless steel and carbon steels.

Where to Buy

Product Overview

Applications

  • Light Fabrication
  • Maintenance & Repair
  • Auto Body
  • Farm/Home

What's In The Box

  • 3 metre Power Cord
  • ErgoPlus 3 metre Euro Gun
  • Elite Argon Regulator
  • Single Flow
  • 4 metre Arc Set
  • with Jack Plugs

Warranty*

For details, refer to the Miller warranty statement.

Portability

When the job can’t come to you, the MPi 220P contains all you need to MIG weld in one small lightweight package. With the flip of a switch, all processes are available to meet the application at hand.

Durable Cast Aluminium Feedhead

Incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.

Large Graphical Display

Guides users through process and parameter setup with ease and high visibility.

Excellent Arc Characteristics

The MPi 220P offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2. Easy access to output studs provides convenient polarity changeover when changing from solid or flux cored wires. 

Selectable Trigger Configuration

Allows the operator to choose standard or 2T trigger method.

Built-in Run-In/Crater/Burnback Function for MIG

Helps provide better arc starts and reduces craters.
 

Adaptive Hot Start™

Increases the output Amperage at the start of a weld if necessary, eliminating electrode sticking.

Thermal Overload Protection

Shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

Built-in Upslope/Downslope Function

For TIG. Helps provide better arc starts and reduces craters.

Synergic Welding Mode

Offers the simplicity of single knob control. The machine will select the correct Voltage and Amperage based on the wire feed speed (WFS) set by the operator.

Full Weld Process Capability

MIG, Pulse MIG, Stick and TIG are available to meet the demand of current applications.

Adjustable Preflow & Postflow

Gives operator better control of the gas parameters affecting weld zone.
 

Specifications

  • MIG
  • Stick
  • TIG
  • 1 Phase
  • Input Power
    230 VAC 50/60 Hz Single Phase
  • MIG Rated Output
    110 A at 17.5 V, 100% Duty Cycle
    140 A at 21.0 V, 60% Duty Cycle
    180 A at 23.0 V, 35% Duty Cycle
  • Stick Rated Output
    100 A at 24 V, 100% Duty Cycle
    130 A at 25.2 V, 60% Duty Cycle
    180 A at 17.2 V, 35% Duty Cycle
  • TIG Rated Output
    100 A at 14 V, 100% Duty Cycle
    130 A at 25.2 V, 60% Duty Cycle
    170 A at 26.8 V, 35% Duty Cycle
  • Max. Open Circuit Voltage
    MIG 35 V
    Stick/TIG 65 V
  • Dimensions (mm)
    H: 365
    W: 237
    D: 548
  • Weight
    16kg

Related Products

Related News

© 2019 Weldwell New Zealand. All rights reserved. A dvision of ITW