Miller Bobcat 260 NEW

The most popular welder/generator in the industry

MR907792001 (Petrol) (with stop/start remote),

Improved rugged welder/generator great for Stick and Flux-Cored welding and designed for maintenance/repair operations, construction, farm, ranch and generator use.

Accu-Rated™ peak power beats the competition's verys hort-duration peak or surge power.


New remote start/stop.


Hands-free starting with eChoke™ technology.

Where to Buy

Product Overview

Applications

  • Maintenance
  • Repair
  • Work Trucks
  • Farm
  • Fabrication
  • Structural Steel Work
  • Stand-Alone Generator

What's In The Box

  • Bobcat 260 Machine

Warranty*

For details, refer to the Miller warranty statement.

The industry’s most popular welder/generator is getting better. Building on its exceptional value, the new Bobcat is:

  • Quieter to operate.
  • Smaller and lighter.
  • Easier to maintain.

Remote Start/Stop

Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work  without the hassle of walking back to your machine. The remote start/stop on Bobcat 260  welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.

Savings on Fuel and Maintenance

When your machine is out of reach, it’s a hassle to walk back to turn it off — so you let it run all day. Running a welder/generator when you’re not welding or generating AC power uses more fuel and adds unnecessary hours to the engine, which leads to an increased need for oil changes, air filters, fuel filters and even generator brushes. You’re wasting money on fuel and doing more routine maintenance than you need to. A Bobcat welder/generator with remote start/stop is quick
and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.

Hands-free Starting

Carbureted gas Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands-free.

Accu-Rated™ - Not Inflated Generator Power

Our Accu-Rated™ 11,000 watts of usable peak power is delivered for a minimum of 30 seconds. Accu-Rated™ means peak power is usable for maximum generator loads such as plasma cutting. Accu-Rated™ peak power beats the competition’s very short-duration peak or surge power. Use your peak power, it’s more than a number.

Designed for Reliability

The most rugged, durable and long-lasting in the industry. The Bobcat 260 has been manufactured to exceed requirements for extreme working conditions and they are hard-working from the core with:

  • Copper windings and iron generator components for a quality-built machine.
  • Lugged — not soldered — heavy internal leads for better field durability.
  • Superior cooling technology for maximum performance and engine life.
  • Protective cover for the weld studs and 240 V socket outlets.
  • Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability.

Easy Maintenance

With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. Servicing is simple because of:

  • Oil checks that can be performed easily through the top of the machine by the access door.
  • Toolless panels that allow for quick access.
  • Single-side fuel fill and oil drain/filter.

Auxiliary Output

  • 2 X 15 Amp Sockets.
  • RCD. 1 X 32 A 240 V
  • 1PH 60 Hz.

Specifications

  • MIG
  • Multi-Process
  • Plasma Cutting
  • Stick
  • TIG
  • Gouging
  • Rated Output
    CC/AC Stick/TIG 225 A at 25 V, 100% duty cycle
    CC/DC Stick/TIG 260 A at 25 V, 100% duty cycle
    CV/DC MIG/FCAW 260 A at 28 V, 100% duty cycle, 75 A at 25 V, 60% duty cycle
  • Generator Continuous Power
    9,500 W
  • Generator Peak Power
    11,000 W
  • Current Type
    AC / DC
  • Amperage Range
    CC/AC (Stick/TIG) 40 - 260 A
    CC/DC (Stick/TIG) 40 - 260 A
    CV/DC (MIG/FCAW) 17 - 28 V
  • Weld Output
    CC / CV
  • Dimensions (mm)
    H: 711
    H: 832 (to top of exhaust)
    W: 508
    D: 1029
  • Weight (without fuel)
    Petrol: 117kg

Related News

© 2024 Weldwell New Zealand. All rights reserved. A dvision of ITW