Pro-Heat 35
Reduces Pre-Heat Time by up to 75%
Companies using the ProHeat™ 35 have reduced pre-heating time from over 2 hours to just 30 minutes. The faster heating time reduces costs due to less labour time, plus provides a mush safer welding environment.
Applications
TRANSMISSION PIPELINE - CONSTRUCTION/REPAIR
PIPE FABRICATION SHOPS
POWER PIPING - CONSTRUCTION/REPAIR
PETROCHEMICAL - CONSTRUCTION/REPAIR
SHIPUILDING
MINING EQUIPMENT MAINTENENCE
DRILL PIPE MANUFACTURING
SHRINK FIT
Pre-heat Time can be Reduced by up to 70%
With induction heating the part will reach the desired temperature in a much shorter time compared to traditional flame and resistance heating processes, so your job will get done faster.
Reduce Costs
The Pro-Heat 35 reduces costs due to less labour time, plus there is no fuel costs or expensive ongoing inspection or audit costs associated with induction heating.
Safer Welding Environment
Induction heating does not expose welders to open flame, explosive gases and hot elements.
Easy Set-up
The Pro-Heat 35 induction heating system is easy to set up and pull down, making it versatile to go from job to job.
Specifications
Input Power
400 - 460 V, 3 Phase 50/60 Hz CE
Output Frequency
5 - 30 kHz
Rated Output
35 kW at 100% Duty Cycle
Input Amps At rated Output
60 A, 400 V
kVA/KW At Rated Output
39/37
Dimensions (mm)
H: 669
W: 552
D: 933
Weight
103kg
Resources
Reviews (1)
Cost saving and quality benefits are huge
Best solution for controlling preheat for welding heavy cast bucket lips. Cost saving and quality benefits are huge! Neil H
Pro-Heat 35
Reduces Pre-Heat Time by up to 75%
Companies using the ProHeat™ 35 have reduced pre-heating time from over 2 hours to just 30 minutes. The faster heating time reduces costs due to less labour time, plus provides a mush safer welding environment.
Applications
TRANSMISSION PIPELINE - CONSTRUCTION/REPAIR
PIPE FABRICATION SHOPS
POWER PIPING - CONSTRUCTION/REPAIR
PETROCHEMICAL - CONSTRUCTION/REPAIR
SHIPBUILDING
MINING EQUIPMENT MAINTENENCE
DRILL PIPE MANUFACTURING
SHRINK FIT
Specifications
Input Power
400 - 460 V, 3 Phase 50/60 Hz CE
Output Frequency
5 - 30 kHz
Rated Output
35 kW at 100% Duty Cycle
Input Amps At rated Output
60 A, 400 V
kVA/KW At Rated Output
39/37
Dimensions (mm)
H: 669
W: 552
D: 933
Weight
103kg
Resources
Reviews (1)
Cost saving and quality benefits are huge
Best solution for controlling preheat for welding heavy cast bucket lips. Cost saving and quality benefits are huge! Neil H